piece handling

CONVEYOR BELT TYPE NTT

Conveyor belt with aluminum frame to carry the cookware. The dimensions can vary according to the customer’s needs and the type of machinery to which it is connected. Possibility of integrating a centering device, auto-dimensioning in height and depth, controlled by a touch-screen monitor, if the belt is used to load a machine connected to it. Possibility of splitting the belt, if it is integrated to a vision system.

LASER CENTERING TYPE CLL01

Conveyor belt with belts that, connected to an adjustable goujon alignment device, allows to center cookware products to mark a logo on the bottom, by means of an external laser marker connected to the machine.
Dimensions (width x depth x height)
450 x 2050 x 1600 mm
Weight
300 Kg
Pneumatic consumption
250 Nl/1”
Power installed
1 Kw

CURVE WITH ROLLING SHUTTERS TYPE CTP

Curved conveyor with rolling shutters and adjustable side guides, to convey cookware products. The dimensions can vary according to the customer’s needs and the type of machinery to which it is connected.

TILTER TYPE BRT

Cookware tilter in line with double suction cup. In case it is not necessary to tilt the product, the structure can be positioned out of the working area by means of an electronic linear actuator, allowing the passage of products that must not be tilted. Suitable to be inserted in an automatic finishing line, due to the rapidity of the tilting cycle. The dimensions can vary according to the customer’s needs.

MOTORIZED ROLLER CONVEYOR TYPE BRMC

Conveyor with horizontal or curved rollers, with rollers in rubber or other material according to specific dimensions, to move the products in different directions. The dimensions can vary according to the customer’s needs and the type of machinery to which it is connected.

EXCHANGE ROLLER CONVEYORS TYPE BRCC

Exchange roller conveyor for the simultaneous management of two transport lines. The roller conveyor, by means of rubber rollers and a pneumatic device, allows to manage both the sorting of a production towards two conveyors, and to convey two productions towards a single belt. The dimensions can vary according to the customer’s needs and the type of automatic line in which it is inserted.

ALIGNMENT CONVEYOR BELT TYPE BFF

Roller and belt conveyor, allows the alignment of a defined quantity of products that, in its classic use, when leaving the washing tunnel must be aligned to reach the spray booth. The dimensions can vary according to the customer’s needs, to the type of automatic line in which it is inserted and the type of machinery to which it is connected.

© 2020 BONTEMPI SRL - VIA CAPORALINO 1/I 25060 - Cellatica (BS)
P.IVA C.F. 03414090179 - REA 393141 - CAP.SOC. € 30.000 i.v.
Tel. +39 030 252 2999 - Fax. +39 030 277 0644 - Email: This email address is being protected from spambots. You need JavaScript enabled to view it.

code, project & design by Fogliarini - Brand Identity Design